EME Mobile Tool (EMT) v3.22.00 Released Notes:

World First! Added OPPO Module Qualcomm SnapDragon 778G chips: Supported K9S, RENO 7_5G, REALME Q3S, REALME Q3T, REALME GT MASTER EDITION, REALME 9_5G SPEED EDITION etc Flash, Read/Erase/Write Partition, Factory Reset, Reset FRP, Partition File Manager etc functions!

Added OPPO Module Qualcomm SnapDragon 888 chips: Supported FIND N, FIND X3 PRO, FIND X5, K10 PRO, REALME GT2, REALME GT_5G etc Factory Reset, Reset FRP etc functions!

Added OPPO Module Qualcomm SnapDragon 680 chips: Supported A36, A76, A96, F21 PRO, K10, RENO 7_4G, REALME 9, REALME 9I etc Factory Reset, Reset FRP etc functions!

More Information and discussion are HERE

Best Regards
EmeGSM Team

source

1. Huawei account, if you don’t have make one for free.
2. Product Model Name, which you can get going in settings>about phone, there you will see model number
3. serial number & IMEI is written on packing box, but you can also get by dialing this code *#*#2846579#*#* and then tap on veneer information and then tap on other info.
4. To obtain the product ID number dial *#*#1357946#*#*

then hit submit button, and it will show you unlock code immediately.

Click here for official unlock code request page

(if official link is not working use our low cost paid service to get unlock code: Click For Details)

Tool : Odin
Version : V3.12.3 Latest
Support : Samsung Devices
Size : 1.1 MB
Password : No
Credit : Free
Modified : No

System Requirement

• PC with Windows OS or Laptop
• Latest Samsung USB Device Driver
• ADB and Fast Boot Tools for Samsung Device
• Android USB Data cable for Connectivity

Read Carefully Before Use Odin

• Make a backup of your Device before install or update Firmware
• Download the latest Odin Flash Tool
• Install latest Samsung USB Android Device Driver
• Download always confirm and tested Rom for Required Device
• Choose always correct files from correct Tabs for flash
• BL Tab only choose Bootloader file for flash
• AP tab only choose AP file from extracted firmware
• CP Tab only choose CP file from downloaded Samsung Firmware
• CSC Tab choose CSC file for flash Samsung Device

What is New in Latest Odin V3.12.3 ?

Odin Flash Tool developed by Samsung to flash its devices to upgrade with latest Android OS Firmware,Stock Rom,Custom Rom,Root,Kernel Root,ENG Boot,ENG Sboot,ENG Modem,Combination Files.With Odin Flash Tool, we can flash files with .tar.md5 or .tar extensions, but Odin doesn’t recognize .zip file extension.Samsung Odin Flashing tool works on Windows PC and laptops. For use Odin Flash Tool on Mac or Linux, we must have to download Heimdall or the Java version of the Odin tool.

File Information

File : Samsung Mobile USB Driver
Type : Application
Version : 1.5.61.0 Latest
Size : 15MB

How to Install Samsung USB Device Driver Latest Setup

• First of uninstall or remove downgrade version or bugs error Drivers of Samsung from PC
• Reboot PC and power ON again
• Download and extract Samsung USB Driver into PC drive
• Disconnect Samsung Device or any other Android Device from PC
• Open Extracted folder and install Samsung USB Device Driver latest setup
• Click Next and agree for complete installation process
• Finish when successful Samsung USB Driver installed into PC
• Connect Samsung Device with PC via USB Data Cable
• Wait after searching and installing Samsung connectivity USB Driver,Samsung Device now ready for use

Manual Installation

•  Click on Start menu and right-click on My Computer
• Select Manage or My Computer Properties
• Click on Device Manager in the left panel
• When the Device Manager window opens, expand categories and check the devices
• Choose Update Driver Software by right-clicking on the device
• Now Browse to find Samsung Mobile Phone USB Driver latest setup.The place where you have Extracted it.
• Find the extracted files into the PC and select the Samsung Mobile Phone USB Driver
• Finally, Click on Next button to install the driver and allow the the installation process

There are hundreds of tools for mobile phone repairing available in the market. It is important to select the best brand. Below all the tools and equipment needed for mobile cell phone repairing:

[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column width=”2/3″][vc_column_text]Soldering Iron: Used to solder small components like capacitor,

resistor, diode, transistor, regulator, speaker, microphone, display etc. A 50 watt soldering iron is good enough for most mobile phone repairing job. When buying a soldering iron, select the one that is easy to hold and does not burn you hand. The soldering iron must have option to choose and select different types and shapes of soldering tips or bits. These tips or bits must be replaceable. It must also be ESD-Safe (Antistatic) because most electronic components in a mobile phone are very sensitive and can get damaged due to static charge or static electricity. Hakko and Weller are two world renowned brands who manufacture, sell and export world class soldering irons and other soldering tools and equipments.[/vc_column_text][/vc_column][vc_column width=”1/3″][vc_single_image image=”4858″ img_size=”full” title=”Soldering Iron”][/vc_column][/vc_row][vc_row][vc_column width=”1/3″][vc_single_image image=”4859″ img_size=”full” title=”Soldering Station”][/vc_column][vc_column width=”2/3″][vc_column_text]Soldering Station: A soldering station has 2 units – a station and an

iron. It has option to control temperature depending on the heat requirement of the soldering job being done. The soldering iron is attached with the soldering station. It is better and more convenient than traditional soldering iron. It makes soldering work much easier and faster. When buying a soldering station for mobile phone repairing one must always select an ESD-Safe (Antistatic) model. Hakko and Weller are two world renowned brands who manufacture, sell and export world class soldering irons and other soldering tools and equipments.[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column width=”2/3″][vc_column_text]PCB Holder / PCB Stand: A PCB (Printed Circuit Board) holder or PCB

stand is used to old the PCB of a mobile phone while soldering or repairing. It holds the PCB very strongly and doesn’t allows it to move thus helping in repairing. Again, it is important and wise to select a good quality PCB holder rather than a cheaper and inexpensive one.[/vc_column_text][/vc_column][vc_column width=”1/3″][vc_single_image image=”4853″ img_size=”full” title=”PCB Holder / PCB Stand”][/vc_column][/vc_row][vc_row][vc_column width=”1/3″][vc_single_image image=”4861″ img_size=”full” title=”Solder Wire”][/vc_column][vc_column width=”2/3″][vc_column_text]Solder Wire: Solder wire is used to solder electronic components, ICs

or jumper. Composition of most solder wire is Tin / Lead in the ratio 60:40 or 63:37. Since the introduction of RoHS (Restriction of Hazardous Substances) from electronics, more and more companies are using lead-free solder. Lead-free solder wire is available in many compositions but the most common composition is Tin / Silver / Copper in the Ratio 96.5:3.0:0.5. Solder wire is available in different diameters such 2.0mm, 1.5mm, 1.0mm, 0.5mm, 0.2mm etc. For mobile phone repairing 0.5mm solder wire is best suitable. Kester is a world renowned manufacturer and supplier of solder wire and other soldering material.[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column width=”2/3″][vc_column_text]Thinner or PCB Cleaner: Thinner or PCB cleaner is used to clean the PCB of a mobile phone. The most common PCB cleaner used in mobile phone repairing is IPA or Isopropyl Alcohol. It is important to buy only good quality PCB cleaner as poor quality PCB cleaners can damage the board.[/vc_column_text][/vc_column][vc_column width=”1/3″][vc_single_image image=”4863″ img_size=”full” title=”Thinner or PCB Cleaner”][/vc_column][/vc_row][vc_row][vc_column width=”1/3″][vc_single_image image=”4844″ img_size=”full” title=”Jumper Wire”][/vc_column][vc_column width=”2/3″][vc_column_text]Jumper Wire: This is a thin laminated or coated copper wire used to jumper from one point to another on the track of a mobile phone while repairing. Most people doing the work of mobile repairing do jumper to solve many problems.[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column width=”2/3″][vc_column_text]Blade Cutter: This is used to remove lamination from jumper wire. It can also be used for several other purposes.[/vc_column_text][/vc_column][vc_column width=”1/3″][vc_single_image image=”4837″ img_size=”full” title=”Blade Cutter”][/vc_column][/vc_row][vc_row][vc_column width=”1/3″][vc_single_image image=”4854″ img_size=”full” title=”Point Cutter”][/vc_column][vc_column width=”2/3″][vc_column_text]Point Cutter: It is used for cutting.[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column width=”2/3″][vc_column_text]Nose Cutter: It is used for cutting.[/vc_column_text][/vc_column][vc_column width=”1/3″][vc_single_image image=”4851″ img_size=”full” title=”Nose Cutter”][/vc_column][/vc_row][vc_row][vc_column width=”1/3″][vc_single_image image=”4855″ img_size=”full” title=”Precision Screwdriver”][/vc_column][vc_column width=”2/3″][vc_column_text]Precision Screwdriver: It is used to remove and tighten screws while assembling and dissembling a mobile phone. Precision screwdrivers of sizes T4, T5, T6 and forehead are good for most mobile repairing job.[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column width=”2/3″][vc_column_text]Tweezers: These are needed to hold electronic components, ICs, jumper wire etc while soldering and Desoldering.[/vc_column_text][/vc_column][vc_column width=”1/3″][vc_single_image image=”4864″ img_size=”full” title=”Tweezers”][/vc_column][/vc_row][vc_row][vc_column width=”1/3″][vc_single_image image=”4838″ img_size=”full” title=”Brush”][/vc_column][vc_column width=”2/3″][vc_column_text]Brush: These are used for cleaning the PCB of a mobile phone while repairing. It is important to buy only ESD-Safe cleaning brushes.[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column width=”2/3″][vc_column_text]Multimeter: Used to find faults, check track and components. Always buy a good quality reliable ESD-Safe digital Multimeter for mobile repairing works.[/vc_column_text][/vc_column][vc_column width=”1/3″][vc_single_image image=”4850″ img_size=”full” title=”Multimeter”][/vc_column][/vc_row][vc_row][vc_column width=”1/3″][vc_single_image image=”4842″ img_size=”full” title=”Hot Air Blower / Heat Gun”][/vc_column][vc_column width=”2/3″][vc_column_text]Hot Air Blower: It is also called SMD (Surface Mount Device) rework system and SMD repair system. It has control to regulate or manage temperature and flow or hot air. Always buy a good quality ESD-Safe hot air blower.[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column width=”2/3″][vc_column_text]Battery Booster: It is used to boost the power of battery of a mobile phone.[/vc_column_text][/vc_column][vc_column width=”1/3″][vc_single_image image=”4834″ img_size=”full” title=”Battery Booster”][/vc_column][/vc_row][vc_row][vc_column width=”1/3″][vc_single_image image=”4865″ img_size=”full” title=”Ultrasonic Cleaner”][/vc_column][vc_column width=”2/3″][vc_column_text]Ultrasonic Cleaner: Used to clean PCB of a mobile phone and electronic components.[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column width=”2/3″][vc_column_text]BGA Kit: Used to Reball and repair ball-type ICs. BGA stands for Ball Grid Array.[/vc_column_text][/vc_column][vc_column width=”1/3″][vc_single_image image=”4836″ img_size=”full” title=”BGA Kit”][/vc_column][/vc_row][vc_row][vc_column width=”1/3″][vc_single_image image=”4847″ img_size=”full” title=”Magnifying Lamp”][/vc_column][vc_column width=”2/3″][vc_column_text]Magnifying Lamp: It is used to see the magnified view of the PCB of a mobile phone. Most magnifying lamps also have light. Magnifying lamps are available in different magnification such as 3x, 4x, 5x, 10x, 50x etc.[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column width=”2/3″][vc_column_text]Mobile Opener: These are used to open the housing or body of a mobile phone.[/vc_column_text][/vc_column][vc_column width=”1/3″][vc_single_image image=”4849″ img_size=”full” title=”Mobile Opener”][/vc_column][/vc_row][vc_row][vc_column width=”1/3″][vc_single_image image=”4840″ img_size=”full” title=”DC Power Supply”][/vc_column][vc_column width=”2/3″][vc_column_text]DC Power Supply: Regulated DC (Direct Current) power supply is used to supply DC current to a mobile phone. Most repair person used DC power supply to switch ON a mobile phone without battery.[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column width=”2/3″][vc_column_text]Liquid Flux: It is used to clean PCB track and legs or pins of electronic components while soldering. Liquid flux improves quality of soldering. Kester flux is world renowned for good quality.[/vc_column_text][/vc_column][vc_column width=”1/3″][vc_single_image image=”4846″ img_size=”full” title=”Liquid Flux”][/vc_column][/vc_row][vc_row][vc_column width=”1/3″][vc_single_image image=”4852″ img_size=”full” title=”Paste Flux”][/vc_column][vc_column width=”2/3″][vc_column_text]Paste Flux: This is also used while soldering.[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column width=”2/3″][vc_column_text]Solder Paste: This is solder in molted semi-solid form. It looks like paste. Solder paste is mainly used for Reballing of ICs.[/vc_column_text][/vc_column][vc_column width=”1/3″][vc_single_image image=”4860″ img_size=”full” title=”Solder Paste”][/vc_column][/vc_row][vc_row][vc_column width=”1/3″][vc_single_image image=”4839″ img_size=”full” title=”Cleaning Sponge”][/vc_column][vc_column width=”2/3″][vc_column_text]Cleaning Sponge: This is used to clean tip of soldering iron while soldering.[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column width=”2/3″][vc_column_text]Desoldering Wire: Desoldering wire or Desolder wire is used to remove excess solder from track of PCB. Chemtronics is world renowned manufacturer and supplier of Desoldering wire.[/vc_column_text][/vc_column][vc_column width=”1/3″][vc_single_image image=”4841″ img_size=”full” title=”Desoldering Wire”][/vc_column][/vc_row][vc_row][vc_column width=”1/3″][vc_single_image image=”4856″ img_size=”full” title=”Screwdriver Kit”][/vc_column][vc_column width=”2/3″][vc_column_text]Screwdriver Kit: It has several screwdrivers of different shapes and sizes to dissemble and assemble a mobile phone.[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column width=”2/3″][vc_column_text]IRDA or Infrared Workstation: This machine is similar to hot air blower. Only difference is that it gives heat through infrared. It is very precise and give heat only where it is needed thus preventing any damage to nearby electronic components on a PCB.[/vc_column_text][/vc_column][vc_column width=”1/3″][vc_single_image image=”4843″ img_size=”full” title=”IRDA or Infrared Workstation”][/vc_column][/vc_row][vc_row][vc_column width=”1/3″][vc_single_image image=”4845″ img_size=”full” title=”LCD Tester”][/vc_column][vc_column width=”2/3″][vc_column_text]LCD Tester: Used to check whether LCD screen of a mobile phone is faulty or not.[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column width=”2/3″][vc_column_text]Microscope: It is used to see a magnified view of PCB or electronic components. These are available in different zoom options. Many microscopes can also be connected to a computer or a monitor.[/vc_column_text][/vc_column][vc_column width=”1/3″][vc_single_image image=”4848″ img_size=”full” title=”Microscope”][/vc_column][/vc_row][vc_row][vc_column width=”1/3″][vc_single_image image=”4862″ img_size=”full” title=”Test JIG Box”][/vc_column][vc_column width=”2/3″][vc_column_text]Test JIG Box: This device is used to diagnose and find fault or problem in a mobile phone. It helps the mobile phone to work and function normally outside its case. This helps to test and check voltage and other test points on the PCB. It simple words it helps the a mobile phone to work without battery.[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column width=”2/3″][vc_column_text]Wrist Strap: It is work in the wrist of the person who is repairing a mobile phone. It helps to discharge or ground static charge thus preventing the PCB or electronic components from any damage[/vc_column_text][/vc_column][vc_column width=”1/3″][vc_single_image image=”4866″ img_size=”full” title=”Wrist Strap”][/vc_column][/vc_row][vc_row][vc_column width=”1/3″][vc_single_image image=”4832″ img_size=”full” title=”Antistatic Hand Gloves”][/vc_column][vc_column width=”2/3″][vc_column_text]Antistatic Hand Gloves: It is important to wear ESD-Safe hand gloves while repairing a mobile phone to prevent PCB and electronic components from static charge.[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column width=”2/3″][vc_column_text]Antistatic Mat: It is laid or placed on the table or workbench where mobile repairing is done. The mat is grounded using a grounding cord or normal grounding wire. This also prevents damage from static electricity.[/vc_column_text][/vc_column][vc_column width=”1/3″][vc_single_image image=”4833″ img_size=”full” title=”Antistatic Mat”][/vc_column][/vc_row][vc_row][vc_column width=”1/3″][vc_single_image image=”4831″ img_size=”full” title=”Antistatic Apron”][/vc_column][vc_column width=”2/3″][vc_column_text]Antistatic Apron: It is a dress work by people who repair mobile phones. This also helps to discharge static electricity.[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column width=”2/3″][vc_column_text]Smoke Absorber: This is like an exhaust fan that helps to filter smoke that comes out while soldering and Desoldering.[/vc_column_text][/vc_column][vc_column width=”1/3″][vc_single_image image=”4857″ img_size=”full” title=”Smoke Absorber”][/vc_column][/vc_row][vc_row][vc_column width=”1/3″][vc_single_image image=”4835″ img_size=”full” title=”Battery Tester”][/vc_column][vc_column width=”2/3″][vc_column_text]Battery Tester: This device is used to test and analyze status or condition of battery of a mobile cell phone.[/vc_column_text][/vc_column][/vc_row]

Diagnostic codes, also called, secret codes, help to get a closer look at the inner functionality of a phone. Most mobile phone repairing technicians use these diagnostic codes to trouble shoot mobile phones and smartphone.

You may remember that whenever you go to a technician or any service center, the first thing they do is enter some code with # symbol and some numbers and few other symbols. These are nothing but diagnostic codes that help the technician to know about the exact problem. They have a list of such codes and they then as and when required. There are a list of these diagnostic codes for Android phones, iPhone, China phones and other phones. Most manufacturers provide such list with their manual that comes with a new phone.

Below you will find a list of codes to diagnose mobile phone problem but use them with caution. Read carefully what each diagnostic code does before entering them in your phone. Some codes can wipe OFF the firmware or delete the vendor-specific updates from the OS. So, be extra careful.

How to Diagnose Mobile Phone Problem

There could be times when you may need to troubleshoot / diagnose your mobile phone or smartphone when there are problems with slow performance, audio, display or any other such problem. There are in-built diagnostic tools and downloadable Apps that can help you easily and quickly diagnose your mobile cell phone and troubleshoot and fix the problem.

Mobile Phone Secret Diagnostic Codes

• iPhone – 3001#12345# * – This will display “Field Test” on your iPhone where you can easily test each part of the phone’s functions.
• BlackBerry: TEST
• HTC: *#*#3423#*#*
• LG: 2945#*# or 2945*#01*#
• Motorola: ##7764726
• Nokia: ##3282
• Samsung: * #0011#
• Sony: 904059+>

The above codes will help you identify software or hardware problem and then it becomes easier to find the solution. Please note that the above codes may not work on all models.

Secret Codes for Android Mobile Phones

Many people are searching for secret codes for Android Mobile Phones. Many website provide correct information while others provide false and useless information.

It is recommended that you use only genuine and useful secret codes from reliable sources. I try my best to provide correct and useful information on this website.

When I first bought my New Samsung Galaxy SII Android Mobile Phone, I was excited and curious to learn about Android. It took time for me to learn but now I must admit that Android is the best Operating System for any Mobile Phone, Tablet or Phablet. The simple and easy to use User Interface makes it the leader.

The Android secret codes mentioned here are applicable to any brand of android mobile phone including – Samsung, China Mobile Phones, Motorola, HTC, Sony, Alcatel, LG, Panasonic, Huawei, ZTE, Spice, Lava, Sony Ericsson, Micromax etc.

PS: Please note that you must use these secret codes at your own risk. If you are a beginner then I suggest taking help of some expert or experienced user before using these codes. These useful secret codes are meant to be used by experienced users and not beginners.

List of Useful Secret Codes for Android Mobile Phones

Most Multimeters, often spelt as Multi Meter, will have following:

1. Function and Range Switch: This switch is used to select the function and desired range as well as to turn the instrument. In order to extend the life of the battery of the Multimeter, this switch must be kept in the “OFF” position when the instrument is not in use.
2. Display or LCD: To display all the readings.
3. Common Jack: Plug in connector for black (negative) test lead or probe.
4. V ? mA Jack: Plug in connector for red (positive) test lead or probe for all voltage, resistance and current (except 10A) measurements.
5. 10A Jack: Plug in connector for red (positive) test lead or probe for 10A measurement.

Packing List or Items that come with a New Multimeter:

1. Multimeter.
2. Set or red and black test leads or probes.
3. Battery.
4. Thermoelectric couple.
5. Operator Instruction Manual.

How to Use a Multimeter (Analog and Digital): Instruction:

How to Measure DC (Direct Current) Voltage / DC Voltage Measurement:

1. Connect the red Test Lead to “V ? mA Jack” and the black lead to

   

   DC Current Circuit Symbol

   “COM” jack.

2. Set the “Range Switch” to desired DC V position. If the voltage to be measured is not known then set the Switch to the highest range and reduce it until satisfactory reading is obtained.
3. Connect Test Leads to device or circuit being measured.
4. Turn ON Power of the device, instrument or component being measured. Voltage will appear on the Digital Display of a Digital Multimeter along with voltage polarity.

How to Measure AC (Alternating Current) Voltage Using a Multimeter / AC Voltage Measurement:

1. Connect the red Test Lead to “V ? mA Jack” and the black lead to

   

   AC Current Circuit Symbol

   “COM” jack.

2. Set the “Range Switch” to desired AC V position.
3. Connect Test Leads to device, electronic component or circuit being measured.
4. Voltage value will appear on the Digital or Analog Display the Multimeter.

How to Measure DC (Alternating Current) Current Using a Multimeter / DC Current Measurement:

1. Connect the red probe to “V ? mA Jack” and the black probe to “COM” jack. To measure DC current between 200mA and 10A, connect the Red probe to “10A” jack with fully depressed.
2. Set the “Range Switch” to desired AC A position.
3. Open the circuit to be measured and connect probes in series with the load in which current is to be measured.
4. Read value on display.

How to Measure Resistance Using a Multimeter / Resistance Measurement:

1. Connect the red probe to “V ? mA Jack” and the black probe to

   

   Resistance Circuit Symbol

   “COM” jack.

2. Set the “Range Switch” to desired Ohms (?) position.
3. If the resistor to be measured is connected to a circuit then TURN OFF POWER and discharge all capacitors before measurement.
4. Connect probes to circuit being measured.
5. Read resistance value on display.

How to Measure Diode / Diode Measurement:

1. Connect the red Test Lead to “V ? mA Jack” and the black lead to

   

   Diode Circuit Symbol

   “COM” jack.

2. Set the “Range Switch” to diode position.
3. Connect Red Test Leads to Anode of the Diode and Black Test Lead to Cathode.
4. The forward voltage drop in mV will be displayed in the screen or display. If the diode is reversed, figure “1” will be displayed.

How to Measure Transistor hFE / Diode Measurement:

1. Set the “Range Switch” to hFEposition.

   

   Transistor Circuit Symbol

2. Determine whether the transistor is NPN or PNP type and locate the Emitter, Base and Collector Leads. Insert the leads into the proper holes of the hFE Socket on the Front Panel of the Multimeter.
3. The Multimeter will display the approximate hFE value at the condition of base current 10 µA and VCD 2.8V.

How to Measure Continuity / Audible Buzzer Continuity measurement:

1. Connect the red Test Lead to “V ? mA Jack” and the black lead to “COM” jack.
2. Set the “Range Switch” to Buzzer.
3. Connect test leads to the two points to be tested. If the resistance is lower than 100 Ohm then there will be buzzer sound which means that continuity is OK.

Test Signal Use:

1. Set the “Range Switch” to Signal Symbol.
2. A test signal appears between “V ? mA Jack” and “COM” jacks. The output voltage is approx 5V p^–p with 50 k ohm impedance.

How to Measure Temperature / Temperature Measurement:

1. Connect the k-type thermoelectric couple to “V ? mA Jack” and “COM” jacks.
2. Set the “Range Switch” to “Temperature Position”.
3. The display will read the temperature value in Celsius or Fahrenheit.

How to Measure Room Temperature / Room Temperature Measurement:

Most Multimeters can easily measure room temperature from 0 to 35 degree Celsius. Just set the “Range Switch” to RT Position and the present room temperature will be displayed.

Warning:

1. To avoid electrical shock, hazard or damage, do not measure voltage exceeding 1000V or 750V above earth ground. Different Multimeters may have different measurement range. Read the instruction manual carefully before operating the Multimeter.
2. Before using the Multimeter, inspect Test Leads, Connectors and Probes for cracks, breaks or crazes in the insulation.
3. Before attempting to open the case of the Multimeter, be sure to disconnect test leads or probes from any energized electronic circuit to avoid electrical shock.

How to Take Care of your Multimeter

When you are using a Multimeter, it is your responsibility to its proper care and prevent it from any damage:

1. Replacing Fuse: Fuse of a Multimeter rarely blow or need replacement. If it happens, it is because of operator error or mistake. If required just replace the old fuse with a new one with proper polarity.
2. Battery Replacement: If the symbol of battery appears on the display, it indicates that the battery has to be replaced.

1. 1G: 1^St Generation in Mobile Telephony.
2. 2G: 2^Nd Generation in Mobile Telephony.
3. 3G: 3^Rd Generation in Mobile Telephony.
4. 4G: 4^Th Generation in Mobile Telephony.
5. AC: Alternate Current.
6. BGA: Ball Grid Array.
7. BSI: Battery Status Indicator.
8. CDMA: Code Division Multiple Access.
9. CPU: Central Processing Unit.
10. DCT: Digital Core Technology.
11. DC: Direct Current.
12. GSM: Global System for Mobile Communications.
13. IMEI: International Mobile Equipment Identity.
14. IC: Integrated Circuit.
15. LED: Light Emitting Diode.
16. PDA: Personal Digital Assistant.
17. PFO: Power Frequency Oscillator.
18. PCB: Printed Circuit Board.
19. RAM: Random Access Memory.
20. RF: Radio Frequency.
21. ROM: Read Only Memory.
22. RTC: Real Time Clock.
23. RX: Receive / Receiver (Receiving Section).
24. SMD: Surface Mount Device.
25. TX: Transmit (Transmitting Section).
26. UEM: Universal Energy Manager.
27. VCO: Voltage-Controlled Oscillator.

Motorola Qualcomm Devices

• Read Device Info
• Normal Mode
• Ap Fastboot Mode
• Diag Mode

Simlocks

• Direct Unlock Most Moto Qcom Devices
• Direct Unlock Most Moto Sprint Devices without root
• Reset Security

IMEI Repair 2 Methods

• Moto Method
• Generic Qcom Method
• Write Meid (Moto Method or Qcom Method)
• Write Esn (Moto Method or Qcom Method)
• Write Spc (Moto Method or Qcom Method)
• Reset Spc (Moto Method or Qcom Method)
• Meid to Esn Converter
• Read Qcn
• Write Qcn
• Read Efs
• Restore Efs
• Reset Efs

Moto MTK TAB

• Moto FRP Reset Single Click
  • XT1760 Old & New
  • XT1761
  • XT1762
  • XT1763
  • XT1764
  • XT1769
  • XT1721
  • XT1723 Old & New
  • XT1724 Old & New
  • XT1725 Old & New
  • XT1726 Old & New
  • XT1663
  • XT1750
  • XT1752
  • XT1754
  • XT1755 Old & New
  • XT1756
  • XT1757 Old & New
  • XT1760
  • XT1770 Old & New
  • XT1771
  • XT1772
  • XT1773 Old & New
  • XT1902
  • ASUS X08

Moto Qualcomm FRP AUTO

• Moto XT 1021
• Moto XT 1063
• Moto XT 1092
• Moto XT 1093
• Moto XT 1095
• Moto XT 1096
• Moto XT 1254
• Moto XT 1521
• Moto XT 1526
• Moto XT 1527
• Moto XT 1528
• Moto XT 1540
• Moto XT 1550
• Moto XT 1557
• Moto XT 1562
• Moto XT 1565
• Moto XT 1575
• Moto XT 1585
• Moto XT 1602
• Moto XT 1607
• Moto XT 1621
• Moto XT 1622
• Moto XT 1625
• Moto XT 1641
• Moto XT 1642
• Moto XT 1643
• Moto XT 1644
• Moto XT 1650
• Moto XT 1655
• Moto XT 1676

Basic Tab

• Read Info
• Sim Lock Read Codes/Direct Unlock
• IMEI Repair IMEI1/IMEI2

Misc Tab

• Enable ADB
• Different Methods
• Factory Mode or Fastboot Mode

FRP Reset

• MEthods (Need usb Debug – NoRoot Needed)
• Nexus 6 FRP Reset New Security

Factory Reset

• Normal Mode
• Fastmode Mode

Reset Screen locks

• Normal Mode / Custom Recovery Mode

Bootloader Tab

• One Click Reboot Tool
• Reboot Bootloader/Fastboot
• Reboot Download
• Reboot Normal
• Reboot Recovery
• Turn Off

Get Unlock Data

• Relock
• Unlock

Moto Factory Flasher

• Ability to Direct Flash Factory Firmwares
• Zip or Firmware xml Files
• Ability to Select Partitions
• Md5 Checksum
• Check and Compare Directly All Files in Flash Package
• Ability to Generate Flashing Script* Worlds first
• Firmware zip or xml to bat

Manual Flasher

• Flash in Boot Recovery Mode
• Flash Erase Before Write
• Reboot After Flash
• Flash any Parttion

Sideload and Recovery mode Flasher

• Flash in Sideload Mode
• Flash in Recovery Mode