EASY JTAG PLUS RED BOX WITH ICFRIEND EMMC BGA 13-IN-1

Z3X Easy-Jtag Plus – Red Edition is an innovative all in one service tool for phone and phone boot repair, data recovery, SPI memory programming and many other features. Supports eMMC, ISP, JTAG, SPI, NAND and much more protocols.

Z3X Easy-Jtag Plus – Outstanding features:

• One click device repair
• Boot repair
• Data recovery
• eMMC firmware repair
• Partition management
• eMMC service operations
• SPI memory programming

Z3X Easy-Jtag Plus – Hardware features:

• Updated Host MCU SAM3X8E (comparing to LPC1768 in old box)
• Updated high-speed FPGA SPARTAN6 (comparing to SPARTAN3 in old box)
• Updated power management subsystem – full digital PWM with ADC control
• Added Micro-USB connector (if additional power required)
• Added VCC and VCCQ switch with overcurrent protection
• Updated USB device interface: USB 2.0 480 Mbps (high speed)
• Integrated ISP engine: Z3X high power pro engine (4 MB/s)
• ISP support 1 and 4 bit* connection
• Added eMMC 8-bit high-speed interface up to 42 MHz
• Integrated NAND* engine: NFC with 4 KB RAM buffer and ECC
• Integrated M-PHY* interface
• Integrated SPI engine: up to 21 MHz clock for popular SPI memory flash IC
• Integrated self-test core that excludes 90% faults in production
• Integrated CCID card reader for Z3X Software Use

Z3X Easy-Jtag Plus – Hardware benefits:

• Box to Host PC speed increased up to 40 MB/sec
• JTAG Interface speed increased by 20%
• eMMC 1 Bit ISP Speed increased up to 4 MB/sec
• eMMC 4 Bit ISP Speed increased up to 12 MB/sec (eMMC 5.0+) **
• eMMC 4 Bit Speed up to 18 MB/sec
• eMMC 8 Bit Speed up to 28 MB/sec (eMMC 5.0+)
• Compatible with 99% host PC systems and OS
• Compatibility with old Easy JTAG 1st generation ISP adapters (1 bit)
• Compatibility with most of the popular eMMC sockets (with supplied adapters)
• Plug and Play for Windows OS 8/ 8.1/10
• Full support for Windows XP

Moorc E-Mate X EMMC 13-in-1 Adapter is designated for direct EMMC memory chips connection with the wide range of supported BGA types.

It is compatible with all most known EMMC boxes: Riff, RIFF 2, ATF, Z3X Easy Jtag, Z3X Easy Jtag Plus, Medusa Pro.

E-Mate X EMMC BGA – Compatible Boxes:

• Medusa Pro Box
• Octoplus Pro Box
• Z3X Easy Jtag Box
• Z3X Easy Jtag Plus Box
• Riff
• Riff Box 2
• EMMC Pro Tool
• GPG EMMC Box
• ATF

E-Mate X EMMC BGA – Compatible eMMC:

• BGA100
• BGA136
• BGA153
• BGA162
• BGA168
• BGA169
• BGA186
• BGA211
• BGA254
• BGA529

IC FRIEND  EMMC 13-in-1 – Package Content:

• Main adapter- 1 pc.
• U-Socket Adapter (Z3X Easy Jtag Plus, RIFF2, GPG EMMC, EMMC Pro) – 1 pc.
• U-Socket Adapter (Medusa PRO) – 1 pc.
• 8-in-1 U-Socket Adapter – 1 pc.
• RJ45 Two-way Cable – 1 pc.
• Flash Memory Adapter – 9 pcs.:
  • 10 × 10
  • 10.5 × 11
  • 10.5 × 13
  • 11.5 × 13
  • 12 × 12
  • 12 × 15
  • 12 × 16
  • 14 × 18
  • 15 × 15

Z3X Easy-Jtag Plus Full Set – Package Content:

• Easy-JTAG Plus Box Hardware
• Z3X preactivated card with EasyJTAG PLUS Activation
• USB A-B cable
• Adapter set – 5 pcs. (JTAG, ISP 1BIT, ISP 4BIT, U-SOCKET, E-SOCKET)
• E-Mate X EMMC 13-in-1